How can the dicing machine be used safely?

The dicing machine is mainly composed of a frame, a casing for cutting materials, a pusher dial, a tool assembly, a transmission system and an electrical control system. During work, the pusher dial drives the object to be cut at a high speed, and uses the centrifugal force of the object to cut the cut object into pieces by means of a slicing knife (the vertical knife), and then cut into strips by a disc cutter and will be cut. The material is fed into the cross-cutting edge and cut into the desired cube or cuboid by a cross-cutting knife.

Although the dicing machine is a common food processing equipment and has the corresponding high quality advantages, when using the equipment, if you do not pay attention to the operation method, or the power supply is abnormal, then the fault and danger It will happen at any time. In this regard, how do we guarantee the safe use of this machine?

In fact, to ensure the safe use of the machine, we can pay attention to two aspects. On the one hand, the corresponding external conditions, such as the power supply, the overall system of the machine, etc., are in good condition, which is beneficial to the dicing operation.

The second aspect is the operation of the staff. The professional operation, without any unfavorable behavior, is a good way to ensure the normal and safe use of the equipment. Do not put your hand into the dial or under the vertical knife during work to ensure personal safety. The equipment must be lubricated after every 4 hours of operation.

Pay attention to daily cleaning to prevent excessive accumulation of products on the cutting parts, which will affect the cutting efficiency. When cleaning, do not use any abrasive materials, metal tools, iron sand and sandpaper to clean any parts. If necessary, use wooden or plastic tools to scrape the shovel.

The oil hole of each active part is filled with 10# oil once per shift. The rolling bearing is replaced with calcium-based grease every quarter. The sprocket and gear are filled with oil in each shift, so it is better to not drip;

Therefore, when using this fruit dicing machine , ensuring safety is the attention of the external conditions mentioned above and the guarantee of the staff's professional operation technology. Of course, the material situation must not be ignored.